GRABER WOODWORKING

DEAN & KATHLEEN GRABER

N3387 “OLD F” ROAD – RIO, WI  53960

920-992-6697 –or- 920-992-6477 (CELL)

SATURDAY, SEPTEMBER 11, 2010 – 9:30 A.M.

 See Photos

LOCATION:  One mile east of Rio, on Hwy 16, to “Old F” Road, south 2 miles (past Bonnet Prairie Church) or one mile east of County Road C, on King Road, to “Old F” Road, north to  the first place on the left.  Watch for auction signs. 

LUNCH BY:  Graber Family.                                                       

REASON:  Job Relocation-Moving to Alaska.

NOTE:  These woodworking tools are in very good condition and look like-new.

WOODWORKING ITEMS:  2003 Felder CF731 Professional Combination Machine, 5 HP sliding table saw, 5 HP shaper w/1-1/4”-3/4” and router spindles, 5 HP 12” jointer/planer, plus extras, also has 2010 F138 stock feeder (3 phase); Oliver 20B wood/metal Patternmakers lathe, 20” over the bed x 10’8” between centers (14’ bed) 1949 original paperwork from Wright Patterson AFB-Ohio, 3 jaw chuck, multiple rests, outboard 24” plate, multiple inboard plates, centers plus much tooling & accessories (3 phase); EBAC LD800 wood drying dehumidification kiln w/extra heat strip, fans, many stickers, mounted inside a 15’ section of “refer” trailer w/doors, added insulation, can dry 1000 bf easily up to 12’6” long; Vacupress industrial Hi-Flo vacuum bag press w/30 mil 49”x121” bag, extra 10”x121” bag (new) veneer cutter, glue, honeycomb, tape & scale; Oneida Cyclone dust collection system w/seamless pipe, blast gates, single phase; McCool Enterprises 10 HP 3 phase converter; Ingersoll Rand (54441456) 2 HP 30 gal vertical compressor on wheels; DeWalt 735, 12.5” planer; Stroke sander, 6”x240” belts (can fit 8”) 72” rolling bed, height adjustable; State B4 oscillating spindle sander w/spindles (new paper) and throat plate, 3ph; Delta AP300 dust collector, 3/4 HP, 1 ph; Delta floor canister dust collector, 3/4 HP, 1ph, 580CFM; Delta 17-900 floor model drill press, 16.5”; Vicmarc VL100 mini wood lathe w/Baldor motor; Powermatic #13 edge sander w/belts, 1 ph; Delta Rockwell 40-440, 24” scroll saw, 3 ph; Porter Cable 5116 omnijig dovetail jig; Bosch 2 HP VS plunge router; Porter Cable 3 HP router; Assort router bits; One gallon pressure pot w/Asturo HVLP gun & hoses; FUJI HVLP turbine unit (complete); Bosch 5” Velcro RO sander w/paper; Porter Cable 3x24 belt sander w/paper; Laser level; 2-Panasonic 12V drills; Complete forstner drill bit set; DeWalt D55155 air compressor; 36”x96” butcher block work bench w/record vise & dog; 9 slip knife cutter heads (3/4”) w/148 sets of knives; Elec winch w/remote; Reliance (Baldor) DC 2 HP 220V elec motor; Many Bessery bars & 3/4" pipe clamps; Flammable 30 gal storage cabinet (18x43x44); Hammer drill; Several shaper cutter heads; Workmate Medallion; Cabinet jack; Extensive woodworking library plus Fine Woodworking issues; Assort small woodworking items; Right angle buffer.

INVENTORY:  Over 3000 sq ft highly figured mostly exotic raw wood veneer and full sheets of paperbacked; Several thousand board feet of lumber, old growth vertical grain doug fir, old growth redwood, cherry, qtr white and red oak, maple, spalted maple, walnut slabs, genuine mahogany, wormy butternut, yellow pine, assorted plywoods; Assort cabinet fasteners, hardware etc; Assort wood dowel rods.

YARD ITEMS:  JD X300 lawn tractor w/42" deck, 17 HP, hydro, less than 60 hours, new 2008 (like new); MTD 5 HP rototiller; Husqvarna 326L gas trimmer; 3 gal backpack sprayer; Heavy-duty wheelbarrow.

TRAILER:  12’x6’ tandem axle trailer, 6000 lb axles.

ANTIQUES & COLLECTIBLES Note:  Some items are stripped, but not refinished.  2-lightning rods w/blue glass globes; Trestle table; Harvest table w/nice granite top; Golden oak buffet w/carving; Marble top dresser; 9’ primitive narrow trestle table & 6-wood chairs; Square bookshelf w/pedestal center; Ornate top for oak dresser w/mirror; Oak library table w/drawer (painted top); Counter-top scale w/marble top, wood base; 2-brown wicker rocking chairs; English oak gate leg drop-leaf table; Primitive wood cupboard; Oak dresser w/carved front; Wood bookcase; Old Schwinn bike;  Hanging milk scale; Chair w/side desk; Cherry pitter; Handsaw sharpening vise; Logging tongs; Can’t hook; Tin warming oven; Children’s chairs (1-willow); Wood rocker plus other chairs; Singer sewing machine (for parts).

LOGS & FIREWOOD:  2-Walnut logs (approx 12”x10’); Willow log (approx 30”x9’); Approx 16 cord of firewood (pine & hardwood) cut for outdoor boilers.

GUNS:  JC Higgins 20, 12 ga pump shotgun; Remington Sportsmaster 512 bolt action 22 cal rifle.

MISCELLANEOUS:  Very nice drafting table of mahogany, pecky hickory, solid surface w/light; Beehive & tools/accessories; 24’ Davidson fiberglass ext ladder; 3-window AC units; Steel shelving & cabinets; Chain binders; 2-compound archery sets; Good set of left-handed golf clubs; Round patio table & chairs; Kenmore gas grill; Assort chairs; 2-SS 5 liter beer kegs, tap & chargers; Portable basketball hoop; 2-black phenolic lab sinks;   Small wood burn stove; Bicycles (child & adult); Live trap; Aquarium; Large galv stock tank; Other misc items.

TERMS:  Cash or Good Check.  Out of state checks require current bank letter of guarantee.  All purchases must be settled for day of sale.  Number System used-Photo ID Required to Register Bid/Buy.  Announcements made at sale take precedence over advertised material.

AUCTIONEER:  Norman Taylor, Jr. (Registered Wisconsin Auctioneer #596) Rio, WI, 920-992-5597 or 608-697-2250. SALE MANAGER:  James M. Seamonson (Registered Wisconsin License #132) Auction Specialists Stoughton LLC, Stoughton, WI 608-873-7791

Back to Auction Calendar